FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Checked the compression last night and this is what I got:
#1 - 100
#2 - 110
#3 - 110
#4 - 115
Will the jump from 100 to 115 going to cause any problems? Any thoughts on what it would take to get all 4 to 115, replace gaskets, seals? Overall, I'm happy with the outcome, just curious if its possible to improve. Plus it will give me something to do this winter....
I usually try to stick with the 10-15% difference from the highest to lowest compression cylinders. Some MFG's will say 25% is acceptable. With the numbers you have, you will be ok.
Wow, within %25 is acceptable, very cool. Considering how the motor is 28 years old, and I picked it up at a steal of a price, I am impressed with the compression turnout. Thanks!
Your readings will be effected by how you did the test.
You will get higher and more consistent readings with the throttle full open, the engine warm, and all plugs removed.
The best thing you can do, is a thorough decarb, to remove the gunk from inside.
Roscoe, thanks a bunch. I am fairly to outboards, I appreciate all of these tips. I think the motor is ready for an official test on the open water. Thanks again!
