hull bungs for a avon searider

[diverib]

hi
anyone know where i can buy the hull bung kit for avon searider ribs
rob

 

[Sea Rider]

Re: hull bungs for a avon searider

Check Zodiac, Avon

 

[cjr1971]

Re: hull bungs for a avon searider

look on ebay.
do you mean the bung to cap the flooding hull ?

 

[Nos4r2]

Re: hull bungs for a avon searider

Mine's bunged with 2 home made expanding bungs in the bow holes and a piece of perspex on the stern hole. It's got a bung in the perspex and a tiny tube running into the boat for pressure relief.

The Avon kit is expensive...

 

[diverib]

Re: hull bungs for a avon searider

Mine's bunged with 2 home made expanding bungs in the bow holes and a piece of perspex on the stern hole. It's got a bung in the perspex and a tiny tube running into the boat for pressure relief.

The Avon kit is expensive...

don't suppose you've got any photo's

 

[Nos4r2]

Re: hull bungs for a avon searider

Sorry, not of the current setup.

The perspex on the stern is just held on with Sikaflex (equivalent to 3m 5200) and the bung is held in with the same.

The pressure relief tube is a length of silicone tube for car windscreen washers , glued through a hole down the middle of the bung then run into the boat over the transom.