hub size needed

[ericcarr2000]

I need to be replacing my wheel hubs and cant seem to find the proper ones to replace them. Can anyone give me some insight into purchasing new hubs? Its just for a single axle boat trailer that hauls a 20 foot fiberglass cuddy boat...
Thanks
Gary

 

[GA_Boater]

Re: hub size needed

Pull a hub and take it to a trailer shop. Impossible to guess what size you need from your description.

 

[ericcarr2000]

Re: hub size needed

Ok after further inspection of the hub, I will be replacing just the bearings and seals on it. The problem I have is I can get the inner bearing seal number which is L68149=1.3750 in. There isn't a number stamped on the outer one which measures 1.06 in. Casn anyone give me some insight into where I can get a kit?

 

[MH Hawker]

Re: hub size needed

Pull a hub and take it to a trailer shop. Impossible to guess what size you need from your description.

What he said.

 

[ericcarr2000]

Re: hub size needed

Forget it, Ill get it taken care of on my own.

 

[DABS]

Re: hub size needed

Standard tapered spindle is usually L68149 with L68110 or L68111 race on the inner, and L44649 with L44610 race on the outer.

 

[ericcarr2000]

Re: hub size needed

Thanks, I just got it taken care of though..