RebelAggie
Cadet
- Joined
- Jul 5, 2016
- Messages
- 8
I had a 85hp Force motor put on the boat about three years ago. Boat shop that did the work replaced all the steering mechanisms under the console also. But during the course of all of this, wires were removed (or just simply cut off) from their connections.
I have replaced all of the toggle switches with new ones, but need help trying to figure out how to properly chain hot and ground wires from lights, to speedo, to fuel gauge switches, as well as from aerator switches to livewell timer.
This is the only diagram I have/can find, but either I'm missing something, or just don't understand the diagram correctly, but I still don't have power to anything on my console.
I have replaced all of the toggle switches with new ones, but need help trying to figure out how to properly chain hot and ground wires from lights, to speedo, to fuel gauge switches, as well as from aerator switches to livewell timer.
This is the only diagram I have/can find, but either I'm missing something, or just don't understand the diagram correctly, but I still don't have power to anything on my console.
Attachments
Last edited: