Help please

Brian133

Cadet
Joined
Nov 5, 2020
Messages
8
Hi does anyone know what type of trim awuator this is. Need to replace it boat is currently wrapped for winter cant get into it. Ty
 

Attachments

  • DDEBDF65-B288-4A70-A1B6-1CF4E21636F8.jpeg
    DDEBDF65-B288-4A70-A1B6-1CF4E21636F8.jpeg
    2.6 MB · Views: 5
  • EFF6771F-1210-4704-B36B-F5CAF8180E03.jpeg
    EFF6771F-1210-4704-B36B-F5CAF8180E03.jpeg
    2.3 MB · Views: 5
  • B46A8D0D-750D-429F-870B-EA7F203C16D4.jpeg
    B46A8D0D-750D-429F-870B-EA7F203C16D4.jpeg
    1.7 MB · Views: 5
  • C7D007AC-EAAD-4190-BB6C-447F4E90E8D7.jpeg
    C7D007AC-EAAD-4190-BB6C-447F4E90E8D7.jpeg
    1.5 MB · Views: 5
  • 1757AA7A-3528-4BA5-B57E-769DB1441A52.jpeg
    1757AA7A-3528-4BA5-B57E-769DB1441A52.jpeg
    1.8 MB · Views: 5
  • 1473B6EC-AF91-47C7-BB32-D0CC24E81B2B.jpeg
    1473B6EC-AF91-47C7-BB32-D0CC24E81B2B.jpeg
    1.8 MB · Views: 5

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
36,047
??-I say it is hydraulic.----Look inside the boat for a motor / pump / reservoir and black plastic oil lines going through the transom.----Any other pictures of this project boat ?
 

Brian133

Cadet
Joined
Nov 5, 2020
Messages
8
??-I say it is hydraulic.----Look inside the boat for a motor / pump / reservoir and black plastic oil lines going through the transom.----Any other pictures of this project boat ?
Ok thanks. Im unable to get inside of boat. Just got shrink wrapped for winter.
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
36,047
Are you looking at buying this boat ??-------Remove the screws on that broken cylinder and I believe you will find one oil line going to that cylinder.
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
47,306
bennet hydraulic, must remove the lines inside the boat before removing actuator.

system uses ATF (pure ATF, not dexron or type F)

you can get replacement parts for the actuator vs replacing the whole actuator. the seals and rear hinge are available for only a few $

never mind, you need a new cylinder. make sure to measure, there are two lenghts.
 

Brian133

Cadet
Joined
Nov 5, 2020
Messages
8
bennet hydraulic, must remove the lines inside the boat before removing actuator.

system uses ATF (pure ATF, not dexron or type F)

you can get replacement parts for the actuator vs replacing the whole actuator. the seals and rear hinge are available for only a few $

never mind, you need a new cylinder. make sure to measure, there are two lenghts.
Thanks Scott.
 

Brian133

Cadet
Joined
Nov 5, 2020
Messages
8
Thanks Scott.
Theres no way i can use the old hydrolic lines and just remove actuator. I have pics of the engine before i had boat wrapped i have a feeling its gonna be tough to get to. Its a 2006 larson cabrio 274. No generator
 

Attachments

  • 7530F35F-0673-4E95-AC10-0B4EBCF8E7C3.jpeg
    7530F35F-0673-4E95-AC10-0B4EBCF8E7C3.jpeg
    1.7 MB · Views: 6
Top