Porterhouse7070
Recruit
Thread starter- Joined
- Dec 15, 2017
- Messages
- 4
Hello all, a little back story. After my grandfather passed away i took this out of his basement. According to my father he could never get it running. So now, its my challenge. However, im not the most mechanically incline - this is my first attempt at working on a motor. So, here i am.
Ive been able get down to the stator plate. The magnet on top seems stuck, and i dont know how to get it off. Heres a couple pictures: http://imgur.com/a/mwSzMuU
The small brass or copper ring comes off but i cant figure out how to get the magnet and stator plate off. I loosened the bolt that pinches the plate, but nothing is budging.
Any help is appreciated! Thanks!
Ive been able get down to the stator plate. The magnet on top seems stuck, and i dont know how to get it off. Heres a couple pictures: http://imgur.com/a/mwSzMuU
The small brass or copper ring comes off but i cant figure out how to get the magnet and stator plate off. I loosened the bolt that pinches the plate, but nothing is budging.
Any help is appreciated! Thanks!