FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
Anybody know anything about fuel / water seperator filters. Can I bypass (hose through) my existing filter and install it externally. Can it be installed before or after primer bulb??
Yes it's a good idea to have one. I installed mine before the bulb as suggested from the mech at west marine to the idea if i had to replace it on the water or anytime i could fill it with fuel by pushing it in instead of pulling through.
Either way you should have one
Anybody know anything about fuel / water seperator filters. Can I bypass (hose through) my existing filter and install it externally. Can it be installed before or after primer bulb??
Regardless of the engine, it is NOT a good idea to bypass any internal filter. However, adding an external water separator is a very GOOD idea. It should be installed between the tank and the primer, never after the primer.
Did mine a week ago, put it before the primer. Left the factory filter in place and it works like a charm. I think the primer pulled the gas through the filter on the 4th pump. Alot more peace of mind knowing all the gas going to the engine is nice and clean.