Sonsy
Recruit
Thread starter- Joined
- Jun 17, 2018
- Messages
- 1
I have a 1999 ficht 225 ina sport craft cuddy 222 offshore has very low hours and been kept inside the whole time one owner and recently I've done some work to get it running better because it was not used much before I bought it. Xd100, new plugs, waterpump, fuel sep, & filter. What happens now is when I first run it it's starts right up idles fine and runs fine but while at speed between 4-5000rpm it will go in and out, not sure if surging is the right word but it does it lightly then will drop below 3000rpm and stay for 45 seconds then go right back and if while below 3000rpm i floor it, it won't go past 5000rpm unless I pull back and let it cruise for a min and it will jump back. Sometimes like today it didn't do it barely at all but once real light. I have not done thermostats and they haven't ever been done yet on this motor also I'm going to decarb it with some spray tuner but I don't think that will fix this issue. If anyone knows what kind of thermostats I should use that's would help me also I've heard to use etec. Can I find them online and do them easily.ive done everything else on my previous motors but this is my first two stroke!
love the power and fuel efficiency of this motor I know the stories but I had a great deal on it and am going to give it lots of love and enjoy it for now since I don't have a lot of extra money to spend my goal is to get her running perfect and feel confident I can take it down the intercostal of Florida and also go out in the gulf fishing and not feel stressed about it crapping out like my last boat. Thanks guys this is my first post I like the layout of this forum a lot!! Cheers mates