DoingTheBestICan
Seaman
- Joined
- Feb 25, 2019
- Messages
- 68
Today I tested the voltage at the switch and back at the motor and here is the readings I got.
At the Switch in forward. No voltage on anything
At the switch in neutral Green wire has 12 volts.
At the switch reverse Blue wire has 12 Volts and Green Wire has 12 Volts.
Back at the motor in Neutral 12 volts on the Green
At the motor again in Reverse there was 12 Volts on the Green and on the Blue there was 11.31 Volts.
Would my next move be go into the lower unit and look at the solenoid or is there something I should test befor assuming it’s the solenoid ?
At the Switch in forward. No voltage on anything
At the switch in neutral Green wire has 12 volts.
At the switch reverse Blue wire has 12 Volts and Green Wire has 12 Volts.
Back at the motor in Neutral 12 volts on the Green
At the motor again in Reverse there was 12 Volts on the Green and on the Blue there was 11.31 Volts.
Would my next move be go into the lower unit and look at the solenoid or is there something I should test befor assuming it’s the solenoid ?
Last edited: