travisj2001
Cadet
Thread starter- Joined
- May 10, 2015
- Messages
- 9
I recently acquired a 1988 Evinrude 25 HP outboard (E25RCCA). I have been messing with the thing for a few weeks and have it to a point to where it idles properly but when increasing RPM is will stall. I initially thought it was a dirty carb so I rebuilt that and still have the same issue. When on the water yesterday I discovered that if I place my hand over the carb to restrict the airflow when accelerating it runs like it should. I thought I must have a carb air filter air box that is missing but when looking for parts I discovered that this motor does not have one. I am thinking the throttle butterfly in the carb must be opening too much and that the throttle linkage is not correct. Full throttle results in the butterfly being completely parallel to the water. Can anyone help?