76SeaRay
Lieutenant Junior Grade
- Joined
- Aug 24, 2017
- Messages
- 1,047
I read the sticky on Fiberglass resins and that was very helpful but I am wondering about the various types and their applications. I have 4 different needs and wondering if one epoxy will do all or should I use different epoxy types for each type of job. Looking for recommendations for the following:
1) Laminate layers of 3/4 inch marine plywood for a new transom
2) Bond the new transom to the hull
3) Tab and cover the new transom and new stringers
4) Floor covering
I see the two following links with a large number of brands and types:
http://www.iboats.com/Boat_Epoxy_Res...view_id.217327
http://www.fiberglasssupply.com/Product_Catalog/Epoxy/epoxy.html
I am working indoors with a shop that I can maintain about 50 to 55 degrees during these winter months. I am in southwest Washington so a damper climate this part of the year.
Thanks...
1) Laminate layers of 3/4 inch marine plywood for a new transom
2) Bond the new transom to the hull
3) Tab and cover the new transom and new stringers
4) Floor covering
I see the two following links with a large number of brands and types:
http://www.iboats.com/Boat_Epoxy_Res...view_id.217327
http://www.fiberglasssupply.com/Product_Catalog/Epoxy/epoxy.html
I am working indoors with a shop that I can maintain about 50 to 55 degrees during these winter months. I am in southwest Washington so a damper climate this part of the year.
Thanks...