paddlefaster
Recruit
Thread starter- Joined
- Aug 3, 2012
- Messages
- 3
Boat has a two battery trolling bank and a cranking battery. I replaced the battery conections on the + sides of both trolling batteries. They are wired: stern batt + to 12v leg of trolling motor bow plug & bow batt -, stern batt - to ground. Bow batt + to 24v leg of trolling motor bow plug, Bow batt - to stern batt +.
The cranking battery handles everything other than trolling motor. That I know of, I have done nothing to the cranking side circuit. I now have zero function from anything on the cranking side!! Other than trim and fuel gauge function when key is turned to run. Motor won't crank, one light from one of the switches on main switch panel will illuminate after being on for a couple min. I have 12v on both sides of each breaker on the breaker panel.
Am I having a ground issue??
I removed all three batteries last night to have them tested this morning. Cranking came back fine, 1 trolling came back bad, 1 needed a charge.
Thanks for your help. I hate for this to be my first post.
The cranking battery handles everything other than trolling motor. That I know of, I have done nothing to the cranking side circuit. I now have zero function from anything on the cranking side!! Other than trim and fuel gauge function when key is turned to run. Motor won't crank, one light from one of the switches on main switch panel will illuminate after being on for a couple min. I have 12v on both sides of each breaker on the breaker panel.
Am I having a ground issue??
I removed all three batteries last night to have them tested this morning. Cranking came back fine, 1 trolling came back bad, 1 needed a charge.
Thanks for your help. I hate for this to be my first post.