Cranking engine by hand

Peter Q

Recruit
Joined
Aug 11, 2022
Messages
1
Hi guys,
New to this,.
I got a Volvo penta 7.4Gi.
Had a mixing of oil and seawater. Removed the mixture, washed the engine with kerosene, emptied it, filled it with fresh oil, cranked it for 5-7 seconds, emptied it again. Until the manifolds and risers were swapped with new one's took like 7 days. Filled it up with fresh oil and new filter, the engine sims to be seized, is there any way I can crank it by hand, if yes , where and how?
Thank you
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
37,816
Is the starter working properly?-----How did seawater get in there ?
 

Horigan

Senior Chief Petty Officer
Joined
Jun 12, 2016
Messages
673
Was there water in the cylinders? If so I would spray WD-40 into the cylinders and let it soak a bit and try to start it with the starter.
 

dypcdiver

Lieutenant Junior Grade
Joined
Nov 1, 2005
Messages
1,039
Remove the plugs and try again, then find out where and how you got water in the oil.
 
Top