corner molding for pontoon

[Pontoonfun]

I have a 89' pontoon sun tracker need {corner caps right angle and nose}, any web sites reccomendations to purchase from.

 

[OldePharte]

Re: corner molding for pontoon

You may try an older marine supply store near you.

Although I can not vouch for them, you may want to look at -
http://www.restorepontoon.com/pontoon/pc/Pontoon-Deck-Hardware-c10.htm

or

http://www.pontoonspecialists.com/c-25-corner-cap-casting.aspx

 

[EGlideRider]

Re: corner molding for pontoon

Tracker is still in business. I would order from them.

TrackerMarine.com

 

[Jeep Man]

Re: corner molding for pontoon

Many suppliers carry them, West Marine, Pontoon Stuff, probably iboats, etc. You can probably find a close match or replace all 4.

 

[5150abf]

Re: corner molding for pontoon

iboats of coarse and they have the best price!

 

[pugbro]

Re: corner molding for pontoon

I have a 89 Bass Tracker Pontoon that i have just completed a complete rebuild and I contacted my local marina and they ordered the stock corners from Tracker...it has been about 8 months ago but I think they were only around $50 for all four....Good Luck

 

[chrisg]

Re: corner molding for pontoon

I have the same issue. the sites listed above don't have the right size. I was thinking if I need to take a hacksaw to a set to get them to fit. What are they made of? can you cut them to size?

 

[Pontoonfun]

Re: corner molding for pontoon

Their made of black black plastic.

 

[EricStarr]

Re: corner molding for pontoon

have a 2000 suntracker party barge i got my cornor caps from www.everythingpontoon.com fit perfectly

 

[gtownky]

Re: corner molding for pontoon

I went to a fab shop and had a new front piece made out of thick alum.