Copper or not?

jaybird56

Seaman Apprentice
Thread starter
Joined
Feb 3, 2013
Messages
31
i am changing from short shaft to long shaft and water tube broke do you really need copper tube or can you use alum.? will it make a difference which type is used?
 

Daviet

Fleet Admiral
Joined
Sep 24, 2008
Messages
8,958
Re: Copper or not?

Are you replacing the tube, I think a new one is made of copper.
If you are trying to patch it up, how are you going to attach a copper tube to an aluminium?
 

jaybird56

Seaman Apprentice
Thread starter
Joined
Feb 3, 2013
Messages
31
Re: Copper or not?

will connect them with a 3/8s rubber gas line and clamps, already put it together and checked water flow is good, will test on river next week, might just be a temp fix . what yall think use copper or if works this way leave it??
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Re: Copper or not?

If it was my mtr I wouldn't feel good about it. Get a new tube and install it. JMHO.
 

hall832

Petty Officer 1st Class
Joined
Sep 6, 2012
Messages
234
Re: Copper or not?

I agree with metriccrescentwrench & boobie, get the correct part and install. Peace of mind.
 

the machinist

Senior Chief Petty Officer
Joined
May 7, 2002
Messages
711
Re: Copper or not?

If you are going to even be close to saltwater, the aluminum will disintergrate.
 

jaybird56

Seaman Apprentice
Thread starter
Joined
Feb 3, 2013
Messages
31
Re: Copper or not?

why is the water line copper ? most of the rest of the motor is aluminum. does anyone know?
 

jerryjerry05

Supreme Mariner
Joined
May 7, 2008
Messages
18,196
Re: Copper or not?

Copper doesn't usually corrode.
Aluminum is cheaper and easy to mill.
Handles heat real well too.
 

jaybird56

Seaman Apprentice
Thread starter
Joined
Feb 3, 2013
Messages
31
Re: Copper or not?

thanks jerryjerry05 i didnt think about the heat,, it is close to the exhaust at the place i joined together but i dont think it gets very hot and has water all around it when in use. still plane on testing it in river this weekend and next water pump change i will go back to copper
 

jerryjerry05

Supreme Mariner
Joined
May 7, 2008
Messages
18,196
Re: Copper or not?

The aluminum will last a long time.
I saw a guy fix his broken tube with just a piece of hose stuck over the tube.
Worked for over 10 years.
Saw PVC pipe in there too.
Lot's of jury riggin going on. :)
 

jaybird56

Seaman Apprentice
Thread starter
Joined
Feb 3, 2013
Messages
31
Re: Copper or not?

The aluminum will last a long time.
I saw a guy fix his broken tube with just a piece of hose stuck over the tube.
Worked for over 10 years.
Saw PVC pipe in there too.
Lot's of jury riggin going on. :)
thats good to know since it has a new water water pump in it, might be a couple years before i want to take it apart again,,,Thanks
 
Top