Converting to a teleflex steering system

[muskellunge]

I have a 1972 16' sylvan boat with what appears to be a crude rack and pinion set up (has a tube behind helm and an extremely rigid cable running to motor) my question is , is that I would like to convert it to a modern system (old one is almost unusable) but am not sure if I should go rotoary or R&P. My console is about 18" wide. It is a 40h.p. johnson if that makes a difference as well. Any input would be appreciated.

 

[Bob_VT]

Re: Converting to a teleflex steering system

Welcome to iboats.

Makes no difference either system will work. Some consoles are not big enough for rotary so do all your measurements before you buy.

 

[ezmobee]

Re: Converting to a teleflex steering system

I've had brand new versions of both and prefer the rotary. I can, however, see how the rack helm would be a little more durable. It had more slop though in my opinion.

 

[muskellunge]

Re: Converting to a teleflex steering system

Thanks for the input, I've been on teleflex's web site and haven't found a good method of making sure I have enough room for a rotary. Any suggestions?