Compression ain't everything

Tinkerer

Senior Chief Petty Officer
Thread starter
Joined
Mar 15, 2003
Messages
760
Blowing heaps of unburnt fuel through my 1967 60HP V4 Evinrude. Compression 107 to 112 psi on all cyls (not bad for a 36 year old original motor), so problem must be in fuel system. <br /><br />Checked and overhauled fuel system. No holes in fuel pump diaphragm and held vacuum. Replaced damaged O rings around high speed tubes and new needle and seat. Excess fuel obviously getting past damaged O rings. Everything now A-O.K. <br /><br />Start up confidently expecting no smoke due to my brilliant diagnosis and repairs. No change. <br /><br />Pulled head. Cyls scored. I guess fuel is forced past rings through scores on downstroke. <br /><br />Not worth the trouble and expense of rebore and rebuild, not to mention pulling out the bolt shanks stuck in the block that I busted getting the head off, which was the only prediction that I got right in the whole sorry episode.<br /><br />Bummer!
 

OBJ

Supreme Mariner
Joined
Dec 27, 2002
Messages
10,161
Re: Compression ain't everything

Hey tinkerer....<br /><br />Sorry ta' hear about yer woes.......been there a time or two my self. However....<br /><br />Look at the experience in a positive way....<br /><br />What have ya' learned from the old mixmaster? Plenty I'd bet. Time to move up in years. Next motor....at least something in the 80's. Don't let one bummer motor deter ya' from the water. <br /><br />In my opinion....Motor boating is the best thing since.....sliced bread. :D :D
 
Top