Clanking/rattling sound after prop change

[Mc Tool]

Are you using fuel with a high enough octane rating ? Is it fresh ? , was the new head gasket the same thickness as the old one ?

 

[Scott Danforth]

I know this is an old thread. Let me know if a new one is required.

It's your thread, you are allowed to post in your old threads

 

[Joshto]

Are you using fuel with a high enough octane rating ? Is it fresh ? , was the new head gasket the same thickness as the old one ?

Regular fuel. Nothing has changed. 'm just going to check the timing proactively.

Question is, is 1 btdc or 2 ATDC?

 

[kd4pbs]

I know this is an old thread. Let me know if a new one is required.

Revisiting the timing topic (I'm going to make sure it's all good after 3 years), I wonder if I misread the manual.

If I strictly follow the serial break of manual 26 page 222, my engine should be 2 degrees ATDC (note #4), not 1 BTDC.

Is that right?

0L375837 > 0L341000.
Yes, that's correct.

 

[Joshto]

0L375837 > 0L341000.

Yes, that's correct.

Thanks. Adjusted it accordingly.