Carburetor leaking

[cjbveteran]

1986 Evinrude 50 E50TLCDE
Rebuilt my carbs and thought everything was good but gas will periodically shoot from my top carbs low speed needle valve opening with a puff of air. Behind the red bushing in the picture

 

[jakedaawg]

You are missing the cover on the throttle cam pick up roller. The timing roller is probably in the same condition. Replace those rollers, preform a link and synch per manual. Maybe check for a sheared flywheel key if that doesn't improve condition.

 

[racerone]

The 1986 carburetors do not show a low speed mixture needle.----Nor the red piece to lock the low speed needle.-----So we do not know what you have or what you are doing.

 

[cjbveteran]

You are missing the cover on the throttle cam pick up roller. The timing roller is probably in the same condition. Replace those rollers, preform a link and synch per manual. Maybe check for a sheared flywheel key if that doesn't improve condition.

Thank you, I had no idea. I’m having problems locating them online to order, would you happen to know where I can order them

 

[jakedaawg]

I would think this site has them. I have no idea how the sales part works. Maybe someone can flag a moderator that could steer you. The one I knew passed.

 

[cjbveteran]

I would think this site has them. I have no idea how the sales part works. Maybe someone can flag a moderator that could steer you. The one I knew passed.

Ok thanks again, I just found and ordered the sleeve and roller for the lower carb

 

[jakedaawg]

You will probably need the timing cam follower roller as well. I think that motor has one, not sure and I am away from my shop.

 

[flyingscott]

Pull the red pieces out of the carb they don't belong there.