FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
see the answer in the link and synch seloc pro post.
Start with 1 1/4 turns out on the mixture screws. Adjust each about 1/8 turn or less at a time and keep them equal. Do not adjust mixture screw too lean! less than 3/4 turns out from lightly seated will cause detonation and melted pistons at or near full throttle.
