hello! I purchased my first boat less than a year ago and am having a hard time developing a good cleaning routine that I am happy with. I want to keep the boat covered as much as possible to protect the upholstery, and I want to clean the inside of the boat after each use. However, I am worried that if I cover the boat right after cleaning it, the dampness will promote mildew and mold. I purchased one of those moisture absorbing buckets but I am not confident that will be good enough. I've researched quite a bit on boat cleaning methods and haven't really found much useful info. So I'm hoping some enthusiasts here can tell me their routine they follow as far as cleaning and covering their boat. Here is what I currently do, maybe I can get some suggestions of things I'm missing or doing wrong? I am a total novice at boating and am trying to learn as much as I can. Thanks!
As soon as I drive the boat out of the water, I usually tilt the engine up and hook the hose to it to start flushing it out. I leave it fushing for a good 15 minutes or so while I prepare to clean the boat. Then I mix some ivory liquid soap in a bucket with water and get a my long handled scrub brush ready. After the engine has finished flushing, I start rinsing the top of the bimini, and then the underneath of it and all the connecting rods. I dont use any soap with the bimini canvas of the metal rods, just water. then I totally soak the inside of the boat with the hose, spraying directly on the seats and floor etc. Then I use the scrub brush to scrub all of the vinyl upholstery with the soapy water, dipping the brush back in the bucket when needed. Then I spray off the upholstery with the hose to wash the soap off. I then rinse the scrub brush and use the same brush to start scrubbing the deck with the same bucket of soapy water and afterwards, I give the inside of the boat a good rinsing down, spraing everything with the hose except for the console. Afterwards, I spray the outside of the boat down as good as possible. now....I would like to cover it but am afraid of mold so I try to wait for it to dry, sometimes I'll wipe it down with a shammy to help.
if I really want to give it a good clean, I will use special deck soap and hull soap too. I use the same brush for all of this (seats, deck, hull), should I not? I'm wondering if the brush I use might be too rough on the vinyl seats. its a medium bristle strenght brush. Also, it is ok to spray directly on the seats to clean them, yes? Should I scrub the hull after every outing? I do use a vinyl protectant as well every once in a while.
my boat is a Hurricane Fundeck with a Yamaha FS150. Sorry if that was a bit long winded
Again, any tips or suggestions would be great.
thanks!
taz
As soon as I drive the boat out of the water, I usually tilt the engine up and hook the hose to it to start flushing it out. I leave it fushing for a good 15 minutes or so while I prepare to clean the boat. Then I mix some ivory liquid soap in a bucket with water and get a my long handled scrub brush ready. After the engine has finished flushing, I start rinsing the top of the bimini, and then the underneath of it and all the connecting rods. I dont use any soap with the bimini canvas of the metal rods, just water. then I totally soak the inside of the boat with the hose, spraying directly on the seats and floor etc. Then I use the scrub brush to scrub all of the vinyl upholstery with the soapy water, dipping the brush back in the bucket when needed. Then I spray off the upholstery with the hose to wash the soap off. I then rinse the scrub brush and use the same brush to start scrubbing the deck with the same bucket of soapy water and afterwards, I give the inside of the boat a good rinsing down, spraing everything with the hose except for the console. Afterwards, I spray the outside of the boat down as good as possible. now....I would like to cover it but am afraid of mold so I try to wait for it to dry, sometimes I'll wipe it down with a shammy to help.
if I really want to give it a good clean, I will use special deck soap and hull soap too. I use the same brush for all of this (seats, deck, hull), should I not? I'm wondering if the brush I use might be too rough on the vinyl seats. its a medium bristle strenght brush. Also, it is ok to spray directly on the seats to clean them, yes? Should I scrub the hull after every outing? I do use a vinyl protectant as well every once in a while.
my boat is a Hurricane Fundeck with a Yamaha FS150. Sorry if that was a bit long winded
Again, any tips or suggestions would be great.
thanks!
taz