I have a 1980's Evinrude 90 hp, 4 cylinder outboard that will not start.
It has run steadily and without problems for many years and gets its annual wintering and spring service by a professional each year.
What first seemed like an electrical problem may be something different. I am handy enough to fix most things, if pointed in the right direction, so I am wondering if anyone here can point me in the right direction.
The problem seemed to start with a dead battery. It turned over weakly and after a few tries at starting was barely turning over, like an old car on a cold winter morning. I took the battery out and my battery charger read it as being only 25% charged. I gave it a full charge and that gave the motor some life, but only as a grinding sound. The bendix does not seem to engage the flywheel, instead just grinding against it. The flywheel can be manually turned all the way around. The flywheel teeth are perfect, but the bendix teeth are a bit worn.
Thinking it had to be related to electrics, I have replaced spark plugs and cleaned all the connections through the entire electrical system, but no change.
My first assumption would be the Bendix teeth, but I cannot help but think it must be connected to electrical issues.
I have posted a video of a start attempt and a close-up of the Bendix here: https://youtu.be/TMpgOh9Yrpw
Any thoughts where I should start with diagnostics? Or any opinion if this is too big of a problem for a home fix (in that case, I will call it a season and have a professional look it over simultaneous to winterizing.
It has run steadily and without problems for many years and gets its annual wintering and spring service by a professional each year.
What first seemed like an electrical problem may be something different. I am handy enough to fix most things, if pointed in the right direction, so I am wondering if anyone here can point me in the right direction.
The problem seemed to start with a dead battery. It turned over weakly and after a few tries at starting was barely turning over, like an old car on a cold winter morning. I took the battery out and my battery charger read it as being only 25% charged. I gave it a full charge and that gave the motor some life, but only as a grinding sound. The bendix does not seem to engage the flywheel, instead just grinding against it. The flywheel can be manually turned all the way around. The flywheel teeth are perfect, but the bendix teeth are a bit worn.
Thinking it had to be related to electrics, I have replaced spark plugs and cleaned all the connections through the entire electrical system, but no change.
My first assumption would be the Bendix teeth, but I cannot help but think it must be connected to electrical issues.
I have posted a video of a start attempt and a close-up of the Bendix here: https://youtu.be/TMpgOh9Yrpw
Any thoughts where I should start with diagnostics? Or any opinion if this is too big of a problem for a home fix (in that case, I will call it a season and have a professional look it over simultaneous to winterizing.