Bell housing spacers Alpha 1 Gen 2

[Superjetjim]

Hi, does anyone know where I can get a couple of these spacers? Assume they sell them as a separate part?

 

[Bt Doctur]

the spacers for the rear mounts do not have brass bushings.
a better description of the part is needed and where its needed

 

[Scott06]

Part 15 https://www.marineengine.com/parts/...w309999/flywheel-coupler-and-flywheel-housing

 

[Fun Times]

What serial number/ year is the transom assembly?
Does it have grease-able or non grease-able hing pin fittings?

Part number 23-847637 covers the non greased hinged pins for the stern drives gimbal ring to bell housing on the outside of the boat… See item number 29 in smaller boxed image, https://www.mercruiserparts.com/bam/subassembly/30862/2686/90

 

[Bondo]

Ayuh,..... Just buy the bolt Kit,....

 

[achris]

When referring to stern drive power packages, 'bell housing' is the part attached to the gimbal ring that the drive bolts up to. I think you are referring to the 'flywheel housing' on the back of the engine. And as such that spacer is part of the rear engine mount attaching hardware. And it's not available separately, you need to buy a full 'bolt kit', as Bondo had said...

Chris...

 

[Superjetjim]

The full bolt kit is $26 x 2 - I’ll have proper dig around and find the originals for that price!

Thanks

 

[achris]

Managed to find an old reference. Try Merc part -99799...

Chris....

 

[Rick Stephens]

Just make them.

 

[achris]

Just make them.

Yep, that's what is do too, but not everybody has access to the tooling, or the skills required to do it...

Chris....

 

[Rick Stephens]

If someone walked into my shop and asked for a couple, I would grab up a piece of thick walled alum tuning with a 1/2 inch hole and toss in a saw. 5 minutes max. Surely there is a small welding business nearby.

 

[Superjetjim]

Thanks chaps, I got an endoscope camera and found them behind the motor. All installed now.