BelewsBoater
Cadet
- Joined
- Jun 30, 2009
- Messages
- 17
There are 4 awg #6 wires- red, red/blue stripe, black, black/blue stripe cables in the stern box. All these 4 are connected to 12/24 volt trolling motor at the bow. A previous owner had the red and black hooked to a starting battery and red/blue stripe and black/striped hooked to deep cycle. So I removed the starting battery and replaced it with other deep cycle. Do I need to have a 40 amp breaker for 1 or both red cable to the batteries? Red and black to battery 1...red/blue stripe and black/blue stripe to battery 2...is that how it should be done? No jump cable or anything like that? A diagram would be helpful.
Appreciated in advance.
Chris
Appreciated in advance.
Chris