I have a different question to ask about a project Evinrude, (1995 E60TLEOC), but thought I would start with a simpler question. I am working through the CDI troubleshooting guide, but have settled on this:
What does it mean for a cylinder to "miss." I assume "miss-fire", which I thought meant it didn't fire at all.
I put a timing light on cylinder one (did on all of them) and the highlighted number changes, in concert with the hesitation in the idle (which is pretty bad, hence working on it). I would think that the number would stay the same (the CDI would fire at the same point) but am curious what this would mean? Does this begin to incriminate the CDI system? This is only at idle. There are other things that I looking at, like the Quick Start not working like it should, cracks on boots from CDI, etc, but seeing different numbers on a timing light seems like a problem?
BTW ... it might be hopping back and forth between the Quick Start advance and the standard idle setting (10 BTDC to 4 ATDC) but I have more work to do in better lighting to validate that)
Any advice?
Thanks!
What does it mean for a cylinder to "miss." I assume "miss-fire", which I thought meant it didn't fire at all.
I put a timing light on cylinder one (did on all of them) and the highlighted number changes, in concert with the hesitation in the idle (which is pretty bad, hence working on it). I would think that the number would stay the same (the CDI would fire at the same point) but am curious what this would mean? Does this begin to incriminate the CDI system? This is only at idle. There are other things that I looking at, like the Quick Start not working like it should, cracks on boots from CDI, etc, but seeing different numbers on a timing light seems like a problem?
BTW ... it might be hopping back and forth between the Quick Start advance and the standard idle setting (10 BTDC to 4 ATDC) but I have more work to do in better lighting to validate that)
Any advice?
Thanks!