94 oil injected 90 HP

[aleutianwest]

I have 1994 90 hp yamaha oil injected with no oil tank what would happen to the lower and upper bearings if i premixwd the gas would i be ok or should i look for a oil system

 

[Ray Neudecker]

Re: 94 oil injected 90 HP

That will work fine. You should remove the entire system though.

 

[aleutianwest]

Re: 94 oil injected 90 HP

do they make a block off or should i just make one

 

[aleutianwest]

Re: 94 oil injected 90 HP

Oh and thanks again. im glad youre a round and share your knowledge because there are afew in this bussiness that dont

 

[deejaycee_2000]

Re: 94 oil injected 90 HP

well try and find a system in the meantime, otherwise if you can just take the oil pump off and take the shaft out that connect the oil pump put it back together and block off the pipes by folding them in half and tying it well with some cable ties or a small hose clamp ...... hope it makes sense .... was a long day

 

[Ray Neudecker]

Re: 94 oil injected 90 HP

You can also get a pump block off plate from the dealer for the consumer version which did not have oil injection.
Thanks for the kind words.