'94 3.0L holley carb float height adjustment

[tbest01]

What is the float height on a 2 barrel holley carb? and how do you adjust it?

 

[skydiveD30571]

Re: '94 3.0L holley carb float height adjustment

Any more info on the carb? There's lots of 2 barrel holley carbs. A list number would help, which is stamped on the front of the airhorn.

http://www.holley.com/TechService/ListNumber.asp

 

[tbest01]

Re: '94 3.0L holley carb float height adjustment

Any more info on the carb? There's lots of 2 barrel holley carbs. A list number would help, which is stamped on the front of the airhorn.

http://www.holley.com/TechService/ListNumber.asp

#3854087

 

[tbest01]

Re: '94 3.0L holley carb float height adjustment

Have other numbers below that one, but believe that may be the one that you need. again, #3854087

 

[skydiveD30571]

Re: '94 3.0L holley carb float height adjustment

Thats the Volvo part number, not the list number. Is there another set of numbers below that one?

Also, do you know your engine's model number? There's a few that could have been used during '94.

 

[Don S]

Re: '94 3.0L holley carb float height adjustment

.

 

[tbest01]

Re: '94 3.0L holley carb float height adjustment

have #80321-1 and #1753 Engine model # is 3.0GL D-MMDA

 

[tbest01]

Re: '94 3.0L holley carb float height adjustment

Awesome! thanks much for the rapid reply! Have a good day

 

[skydiveD30571]

Re: '94 3.0L holley carb float height adjustment

Look at Don's post. for the 80321 carb the float setting is parallel to fuel bowl when bowl is inverted. You will have to pull off the fuel bowl to adjust it. Is yours externally adjustable? aka does it have a nut around a screw on the top of the bowl near the side where the fuel line comes in? According to the part number you gave me, it is externally adjustable. If so, invert the bowl and see if the float needs raised or lowered to be parallel with the bowl floor. Adjust it using the directions in the picture.