Flats Fishing Goon
Cadet
Thread starter- Joined
- May 21, 2017
- Messages
- 10
So I've got an 89 evinrude 100 xp (V4 Crossflow Flatback) with the powerhead removed, I was going to rebuild the powerhead but im worried about the integrity of the cylinderwalls. There is quite a bit of corrosion on the outter walls. I've found an 85 evinrude 185 (V6 Crossflow Flatback) powerhead. Are the heads interchangeable and if im easy on the gas will the driveshaft and gear box hold up to the extra 85hp? Thoughts Please,
Thanks!
Thanks!