Re: 89 Mercury 150 Tune Up
One part that can actually wear is the trigger harness right where it comes out of the trigger. If it gets to be pretty frayed, it's worth it to replace it with a better one before it drops 2 cylinders and makes you limp home. Used is fine. The triggers for 2.0-2.4-2.5 v6 are all the same.
If you go there, use proper tools, and pay close attention to screw condition, torque, and thread retention on the stator screws. If you're into tinkering, it's probably worth while to drill and thread 2 or 3 more holes in the stator mount. You can use either a centering punch or a brad point wood drill to reach down through the stator and mark for the holes.
hope it helps
John