'89 19' Fishmaster restoration

[jbcurt00]

Re: '89 19' Fishmaster restoration

Many have skim coated w/ JB Weld

Might try:

The world's first aluminum filled repair compound.

• Ideal for restoration work on aluminum spars and repairs.
  
• Excellent adhesion to metals or wood. Can be drilled and tapped.
  
• Prevents bleed-through and bleaching.
  
• Ideal for metal leveling and mending, rust repair, use over spot welds and as a finish or barrier coat over all types of fillers.
  
• Aluminum-filled, rustproof and waterproof filler.
  
• Requires minimal shaping or grinding. Has the look and feel of lead.
  
• Adheres to stainless steel.
  
• Includes USC All-Metal liquid reactor.
  
• Available in Gallon or Quart sizes
  

 

[rcatskills]

Re: '89 19' Fishmaster restoration

Poring foam today, waited for an 80 degree day and probably the last one this year. Still some sheet foam to cut and place but need sun to come up and hit boat. Must wait till afternoon for poring. much agonizing about sheets vs pour in but have decided that using wall to wall vinyl and cut sheets to keep poured in foam away from transom and critical drainage passages the benefits of pour in will outway cut sheets. Will pour with floor off using old floor with plastic sheet on it to keep foam flush with top of stringers and then rivet floor down. Still not sure about gettin ht right where floor meets wall as ther is no stringer there just tabs( Starcraft ). may decide to drill and pour those chambers. Any thoughts?