87 johnson 110 vro alarm not working

gadams00

Recruit
Thread starter
Joined
Jul 20, 2018
Messages
3
I've got a 1987 Johnson 110 VRO that already had the VRO disabled when I bought it. There's no beep when you turn the key to accessory position, and I'm pretty sure there should be. I've taken apart the remote controls and I can see the alarm speaker inside, and everything seems to be hooked up. I'm not sure if the disconnection of the VRO was done improperly and disabled the alarm system.

Photo of the place by the starter where the VRO used to be

f6451413-7557-44e5-8eba-5b57aef9b244.jpg


Not a great photo, but you can barely see down there past the fuel pump where the oil line is plugged

IMG_20180720_203231.jpg



Disconnected plug, probably related to the VRO.
IMG_20180720_203248.jpg



Is it okay for that plug to be disconnected? I can't find anything it would plug into. Is it likely that my expensive piece of plastic alarm speaker is just dead? Is there a way to test them with a battery or something?
 

Joe Reeves

Supreme Mariner
Joined
Feb 24, 2002
Messages
13,262
Having the VRO plug disconnected would not interfere with the alarm system.... The warning horn should sound momentarily (1 second) when you turn the key on or should the engine start to overheat.

With the key ON (not running) check to see that you have 12v applied to the purple lead which should be attached to the slide on terminal closest to the built in ground wire of the warning horn.

Ground out the TAN wire that extends from the cylinder head as a test (heat sensor)... the horn should sound. Let us know what you find.
 

Rustywrench

Petty Officer 1st Class
Joined
May 10, 2018
Messages
209
While it is true that disconnecting the VRO has no effect on your warning system otherwise & the replacement horn is on the expensive side I don't see where your model engine was originally equipped with a self test horn? It requires a three wire horn. Does your horn have the three wire horn? Your original horn will be round in shape. The newer style horn is not round except on the face where it fits into the control box hole. It has an additional ground wire that activates the self test feature when the key is turned on. The new horn comes with instruction & addional wire for ground. Hope that helps.
 

Joe Reeves

Supreme Mariner
Joined
Feb 24, 2002
Messages
13,262
Rustywrench.... Yes, you are correct. It is so far back that I overlooked that the engine is a 1987 model... 1989 was the first year for the three wire self test horn.Good catch!

gadams00... Disregard my mention of the self test (beep when the key is turned to ON).
 

gadams00

Recruit
Thread starter
Joined
Jul 20, 2018
Messages
3
Thanks for the replies, guys. I tried the tip about grounding the tan wire from the temperature switch coming out of the hole in the cylinder heads. For whatever reason on my motor the lead coming from the temp switch is black and then connects to a tan wire that goes into the harness. Pic below. Also, there's a wire that's been cut coming out of the harness that I hadn't noticed before. You should be able to see it in the photo. Is that the warning wire from the disabled VRO?

OasMlUA2-j9tpAHLLQCNP8CBXOQrboTQeAZtWVOjNqrquuI60A0HyIPWgnmdM0Yp79lR3gJYGLupSAQPhWpbEMZiTlWfGAUbD2uU_z7zf51LRIjoTJdOCh9DRszGNUEOnD53QsTcSQ=w2400


Anyways, I can tell I'm getting connection to the tan wire and grounding it (sparks when I move the probe on the block) but there's no sound from the buzzer. I pulled the buzzer out of the remote controls, pic below. It's probably not supposed to look all melted like that.

MExuonLjXeRpAPp_aPUhcOx9_JvoexvV5-zUw8k40wq9oVw94O3Uxlt-0wv67l4aOb3ulleS46prAmnT6ViALnvRIonatm9PGF08SJGdPsmVLUR8AyVzjSxwvUXlK5IQ4q3TnpbKCg=w2400


Is there any alternative to buying an OMC 0585992? The prices I'm seeing for that are anywhere from $75 to $95, which is just outrageous.
 

gadams00

Recruit
Thread starter
Joined
Jul 20, 2018
Messages
3
I found some 3-24v 95db piezo buzzers that are $10 for a 5-pack. They don't have spade connector blades, just wires, but I think I could put some male spade connectors on the wires. Dimensions seem ok to fit in the same place in the remote controls. Would this work?
 

Joe Reeves

Supreme Mariner
Joined
Feb 24, 2002
Messages
13,262
Various electronic stores (Radio Shack) have two wire horns that are quite audible.... and many boaters are turning towards them because of the outrageous high prices for that piece of plastic.
 
Top