might be wrong, but think you would not be able to move the throttle lever at the remote unless the timing plate was rotating, linkage broken, or a problem with the cable or box.
Anyway, if you suspect the timing plate is sticking, that would be a place to start. If you aren't ready to take off the flywheel and have at it, you might try spraying some WD-40 up underneath and try moving the plate by hand (or continue trying). The motor would typically need to be in gear to fully rotate the plate. It's usually a buildup of old grease, and you may not be able to resolve it with disassembly, but if mine I would try it.
By moving the plate, I mean reaching up under the flywheel with both hands, and rotating it.