76 Sea Sprite Evinrude motor questions

captdbaker

Cadet
Thread starter
Joined
Mar 10, 2016
Messages
7
Looking a buying a 1976 Sea Sprite with an Evinrude O/B motor. Guy said the starter and propeller needs put back together from motor being taken apart. I'm getting the boat really cheap so even a rebuild or replacement isn't out of the question . My question is, is it very likely this thing will run after getting it back together and are parts readily available reasonable? I attached a pic for reference of motor.
 

Attachments

  • 00S0S_8Ka2dlR6E5O_600x450.jpg
    00S0S_8Ka2dlR6E5O_600x450.jpg
    18.1 KB · Views: 0

jbcurt00

Moderator
Staff member
Joined
Oct 25, 2011
Messages
25,353
Motor questions are often better answered in the outboard motor forum, but yep, aud 70s Evinrude has great parts support.

Depends on its condition if it will start when put back together. Personally, I would assume it doesnt (and wont) run if it cant be made to run before you buy it.

However, motor and trailer are 90% of the value when buying old boats. The hull likely needs lots of work. It is 40yrs old
 
Last edited:

captdbaker

Cadet
Thread starter
Joined
Mar 10, 2016
Messages
7
Thank you for the response. Here's the rest of the boat.
 

Attachments

  • 00n0n_g7C8dmCqLMH_600x450.jpg
    00n0n_g7C8dmCqLMH_600x450.jpg
    30 KB · Views: 0
  • 00T0T_caNAGqVj4O0_600x450.jpg
    00T0T_caNAGqVj4O0_600x450.jpg
    31.5 KB · Views: 0
Top