71 EVINRUDE LOWER UNIT

7TH LAKE

Recruit
Thread starter
Joined
Jul 22, 2003
Messages
1
DOES ANYONE KNOW WHERE I CAN BUY A SNAP RING PLIERS FOR THE PROP SHAFT LOWER UNIT? IT NEEDS TO BE A LONG NECK BECAUSE THE SNAP RING IS ABOUT 10 INCHES INSIDE THE LOWER UNIT OF MY 1971 50 HP OB EVINRUDE.
 

Dhadley

Supreme Mariner
Joined
Feb 4, 2001
Messages
16,978
Re: 71 EVINRUDE LOWER UNIT

Oh -- and welcome to the board! Just noticed the post number.
 

papasage

Senior Chief Petty Officer
Joined
Jan 12, 2003
Messages
785
Re: 71 EVINRUDE LOWER UNIT

hi lake i had that to do on an eletric foot . couldnt find a tool to do it with. i had a pair of needlenose pliers ground the points to fit in hole they were to short to squeese with my hands so i used a pair of channellock pliers. it worked fine . just ues some enguinoty. papasage
 

mrc

Petty Officer 2nd Class
Joined
Dec 8, 2001
Messages
149
Re: 71 EVINRUDE LOWER UNIT

Northern Hydrolic has some long neck snap ring pliers<br />which are long enough to pull the prop seal, but<br />not quite long enough for the oil pump should you<br />ever need to get that one out.
 
Top