70HP Tilt/Trim

[Fish Idaho]

I have a 1993 60HP Evinrude with a bad powerhead..I have a line on a 1987 70HP Johnson, except the 70HP has no tilt/trim. My question is will the tilt/trim off the 60HP work on the 70HP??? Thanks, Alan

 

[emdsapmgr]

Re: 70HP Tilt/Trim

The trim systems are significantly different and may not bolt up. You may have to consider going a different direction. You might consider the possibility of swapping powerheads.

 

[DJ]

Re: 70HP Tilt/Trim

It will not swap. You must be looking at the '87' on ebay.