5.7 350 engine Mercrusier 2011 - RPM low issue under a load

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
41,079
The wiring is in Merc manual 36 and are not able to scan and post do to the sizes. Here is some or some sensors
 

Attachments

  • 555 DLC.jpg
    555 DLC.jpg
    86 KB · Views: 1
  • 555 PCM Fuel pump.jpg
    555 PCM Fuel pump.jpg
    58.9 KB · Views: 1
  • 555 relays.jpg
    555 relays.jpg
    81.6 KB · Views: 1
  • 555 V8 sensors.jpg
    555 V8 sensors.jpg
    78.7 KB · Views: 1
  • 555 PCM Injector Batch firing.jpg
    555 PCM Injector Batch firing.jpg
    81.3 KB · Views: 1

Kianoushaa

Cadet
Joined
Aug 16, 2022
Messages
17
The wiring is in Merc manual 36 and are not able to scan and post do to the sizes. Here is some or some sensors

Thank you. Now, until you read the error codes, what is the problem of the engine speed not increasing from 2000 to above?
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
41,079
Still hard to tell, not enough info as yet
We know compression is within spec and so is fuel pressure

Assuming the motor use to run fine under load, correct?
If it did what happened when it stopped running good?
What do the plugs look like?

Look at the distributor cap, they are known to give lots of problems. Caps can look fine but have problems.
 
Top