FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Ignitor II, # 91146A ignition, With a flamethrower II # 45111 (epoxy recommended for marine) or 45011 (oil) coil. http://www.pertronix.com/ . You will want to remove the purple resistance wire and replace it with a stranded wire spliced into the choke wire to provide a full 12V to the coil and module. Here is the guide: http://www.pertronix.com/support/manuals/pdf/ignitor12vneg.pdf . Good luck.
Ignitor II, # 91146A ignition, With a flamethrower II # 45111 (epoxy recommended for marine) or 45011 (oil) coil. http://www.pertronix.com/ . You will want to remove the purple resistance wire and replace it with a stranded wire spliced into the choke wire to provide a full 12V to the coil and module. Here is the guide: http://www.pertronix.com/support/manuals/pdf/ignitor12vneg.pdf . Good luck.
