3.7l breezeworks alt wires

[scameron7]

just installed electronic ignition and alt. conversion on 1988 3.7l where does the black wire on the alt. go to 3 wire alt and what do i do with the wires that ran to the voltage regulator,

thanks scott

 

[Don S]

Re: 3.7l breezeworks alt wires

The black wire is just a ground. Any place on the block should be fine.

and what do i do with the wires that ran to the voltage regulator,

Assuming you are referring to the yellow/red wires coming from the stator. Personally, I would recommend you remove the stator. That way when (not if) a magnet come loose, it doesn't destroy the pulley when it catches on the stator.
'
The red/purple and the orange wire will go to the alternator.

 

[scameron7]

Re: 3.7l breezeworks alt wires

i removed the stator just installed sleeves on my cam shaft, where does the red/purple and orange wires hook up at?

 

[Don S]

Re: 3.7l breezeworks alt wires

View attachment 470 Alternator Conversion Wiring.pdf

 

[scameron7]

Re: 3.7l breezeworks alt wires

Thanks for the wiring diagram don s. it's what I needed.