3.5 chrysler outboard

[Lee4423]

I have a 3.5 hp Chrysler outboard. It runs, but kinda rough. Where can I get a rebuild kit for the carburetor and a tank gasket? Any help would be appreciated.

 

[racerone]

Typical diagnosis.-----Any other trouble shooting done ?

 

[Lee4423]

Typical diagnosis.-----Any other trouble shooting done ?

Motor sat for at least 6 years with fuel still in it. Also the cork gasket is dry as a bone and missing a few chunks. I don't know where to get this stuff.

 

[racerone]

Mercury dealer can get you this kit.-----Or sierra aftermarket.-----Not hard to find I think.

 

[Nordin]

Try Franze Marine, he will have if it is available.

 

[Lee4423]

I will look into each response. Thanks.

 

[racerone]

It is clearly listed as available.-----A good Mercury dealer can get it for you !!

 

[jerryjerry05]

Always helps if you put the year, model, serial# ???? A picture helps too.
Something that old anything you add can help in finding the parts you need??
I looked up a 1984 3.5 and carb kit is NLA and the tank gasket is NLA
If Franz can't help?? Maybe I can, I have a bin of older Chrysler parts.
If you can find the CHRYSLER part number I might have it.
Send me a PM with the part #s
If I have it I usually give the parts away FREE but I do ask for a donation to an animal shelter. That covers the FREE parts and shipping.

 

[Lee4423]

It will be a couple of days before I get back home, but I will do that, thanks.

 

[racerone]

For a 1984 it is sierra-18-7037 carburetor kit and 10 listed in stock.

 

[Lee4423]

My motor is from the late 1960's but I believe it's this same kit. Thanks.

 

[Sea Rider]

Which year model might that motor be ?

Happy Boating

 

[Lee4423]

Which year model might that motor be ?

Happy Boating

Late 1960's chrysler 3.5 2 stroke.

 

[racerone]

That is the simple air cooled little motor.----Stayed the same for many years.

 

[jerryjerry05]

Ebay has the factory parts book 17$

 

[Lee4423]

That will be a big help, thanks.