brinkkl91279
Recruit
Thread starter- Joined
- Aug 2, 2016
- Messages
- 4
I have an old, 1960's, RX10 28hp Johnson I inherited with a boat. I have the engine running pretty good but it doesn't seem to want to come up to full throttle. If I push the throttle all the way up, the butterfly in the carb is only about half way open. If I am standing behind the boat on the left side of the engine there is a lever that goes into the mount plate and it is stamped slow, start, and fast. I am sure you know what I am seeing. With the boat throttle linkage disconnected and manually moving the lever, it stops in the start position. If I push and hold the lever it will move maybe a half inch past "start" but snaps back as soon as I let it go. Is there another adjustment I am missing. There is a barrel on a rod I can adjust but that puts the carb into the start position. I did replace the ignition coils, maybe I put something back wrong. I am quite mechanically inclined, just not so much with outboards.