1998 johnson venom 200

TxBassMaster

Recruit
Thread starter
Joined
Mar 18, 2017
Messages
3
Not getting any fire, pull the spark plug and ground it to the engine and cranks right up. Any ideas??
 

TxBassMaster

Recruit
Thread starter
Joined
Mar 18, 2017
Messages
3
Yup,someone said it could be power pack but the mechanic said crank the motor and tap the power pack with a screw driver and if the power pack is bad the motor will cut out, well ive done that and motor runs strong, only problem is it will not fire until you pull plug and ground to the motor, after it cranks up I can put the plug back in and hook back up plug wire and the motor will still crank, let it set for a few hours and it does it all over again
 

ondarvr

Supreme Mariner
Joined
Apr 6, 2005
Messages
11,527
So everybody is using the same terms, cranking is the motor turning over before it starts, starting and running is the next step.

​Power packs can do odd things, but so can loose or corroded connections, I'd hate to see you buy a new power pack if that's not the issue.
 
Last edited:

daselbee

Commander
Joined
Jan 20, 2009
Messages
2,765
You pull one plug, and it starts? Then it is turning over too slowly to allow the pack to fire. Removing one plug could cause it to turn over a bit faster.
Fresh battery, new battery cables, starter....any of these could fix it.
 
Top