1996 johnson 200. Carbs question

[Chuck4741444]

Im rebuilding a set of carbs, the old needle set doesn't have the white seal, but the kit includes it. I just readjusted the float. Does it matter as long as the is set?

 

[racerone]

The nylon washer is left out I believe.

 

[dingbat]

Rebuilt the same carb set last fall.

The nylon washer under the seat is OEM Evinrude. Included in float valve and seat assembly- 0396522

While you could probably get away without them, personally I would go back and install the washers as intended. It only takes a couple of seconds to adjust a float and it gives me the piece of mine that the carbs are assembled as designed. No second guessing yourself down the road

 

[racerone]

Leave the plastic washer out on the plastic carburetor.----And the washer is NOT shown in the parts diagram !

 

[dingbat]

Leave the plastic washer out on the plastic carburetor.----And the washer is NOT shown in the parts diagram !

Is it not part of item #10 assembly?

 

[racerone]

??----Look at some other typical carburetor parts pages.----Metal carburetors and see the nylon washer CLEARLY shown.

 

[Chuck4741444]

I used them, set the floats, the float has plenty of travel up and down,