Hello,
I have an 89 v4 120. I have been trying to get it running after recently purchasing it on a boat. It runs great on the flush tool but as soon as I put it in the water it wants to die. It doesn't want to idle or at low RPM. If I go wide open it will run but poorly. Then you can hear the engine kind of straining to run. I rebuilt the carbs. I have the service manual but I can't find the compression numbers to compare to. These are the numbers. Left top 100 left bottom 91, right top 100 right bottom 90. I know the engine was ran hot but not to the point of tightening all the way up. It just confuses me out of water how it runs perfect. Any help would be greatly appreciated.
I have an 89 v4 120. I have been trying to get it running after recently purchasing it on a boat. It runs great on the flush tool but as soon as I put it in the water it wants to die. It doesn't want to idle or at low RPM. If I go wide open it will run but poorly. Then you can hear the engine kind of straining to run. I rebuilt the carbs. I have the service manual but I can't find the compression numbers to compare to. These are the numbers. Left top 100 left bottom 91, right top 100 right bottom 90. I know the engine was ran hot but not to the point of tightening all the way up. It just confuses me out of water how it runs perfect. Any help would be greatly appreciated.