wildman_wilds
Seaman Apprentice
- Joined
- Sep 4, 2011
- Messages
- 34
1989 Bluefin super hawk restoration interior mods. Direct link to photo bucket with more boat photo's. http://s381.photobucket.com/albums/oo260/wildman_wilds/Boat renavation/
It all started when I was ripping the boat I apart. I had noticed that the previous owner used green treated plywood and this stuff corroded the aluminum. So that treated plywood had to go. Cleaned the aluminum in the hull and took out the water lodged foam and replacing it with pool noodles.
I was going to use marine plywood so I decided to use CDX crap plywood and will be replacing the floor again next winter with Thermo-Lite Board? Product Line
-I will find something to buy and put in this boat.
-Rebuilt console and carpeted it.
-CDX plywood painted with deck stain sealent and marine top coat black paint.
-cut out custom front live well/storage for aluminum hatch doors.
-Made custom platform for the rear of boat with custom storage hatch doors.
-custom center storage hatch in between driver and passenger seat.
-19 gallon moeller permanent fuel tank with gas gauge.
-New carpet with 2 tone Navy blue and and silver metallic 16 oz.
-Some aluminum beam and bracket mods to fit new hatches and gas tank etc......
-4 new seats/Attwood centric style seats
-I-pilot Minn kota trolling motor.
-238 Plug style pedestals
-4 way speaker setup with new CD player.
-2 new depth finders
-Possibly a new Yamaha 90HP 4 stroke outboard motor. That is still on the wish list on yamaha credit. Or sell the boat when I'm complete with the project and get my Ranger bass boat
It all started when I was ripping the boat I apart. I had noticed that the previous owner used green treated plywood and this stuff corroded the aluminum. So that treated plywood had to go. Cleaned the aluminum in the hull and took out the water lodged foam and replacing it with pool noodles.
I was going to use marine plywood so I decided to use CDX crap plywood and will be replacing the floor again next winter with Thermo-Lite Board? Product Line
-I will find something to buy and put in this boat.
-Rebuilt console and carpeted it.
-CDX plywood painted with deck stain sealent and marine top coat black paint.
-cut out custom front live well/storage for aluminum hatch doors.
-Made custom platform for the rear of boat with custom storage hatch doors.
-custom center storage hatch in between driver and passenger seat.
-19 gallon moeller permanent fuel tank with gas gauge.
-New carpet with 2 tone Navy blue and and silver metallic 16 oz.
-Some aluminum beam and bracket mods to fit new hatches and gas tank etc......
-4 new seats/Attwood centric style seats
-I-pilot Minn kota trolling motor.
-238 Plug style pedestals
-4 way speaker setup with new CD player.
-2 new depth finders
-Possibly a new Yamaha 90HP 4 stroke outboard motor. That is still on the wish list on yamaha credit. Or sell the boat when I'm complete with the project and get my Ranger bass boat
Attachments
Last edited by a moderator:
