I picked up a used motor and was trying to update electronics since the old coils looked overheated. I replaced them with the same numbers as on the the coil packs which coincides with the numbers on iboats. With the old coils the boat pops up on plane and runs 40mph at 5200 rpm. With the new coils ( I have tried 2 different sets) the boat will slowly come up on plane and then top off at 28mph with a rpm topping out at 4200rpm. I have no idea what would cause this. Same numbers on the coils just new ones don't seem to work. When I put the old coils back on it runs great. Anyone have any ideas as to the cause? I'm worried I will need to replace in a few years and not be able to get the motor running at top speed or getting on plane.