I recently acquired a 1985 Champion Super V 18' in very good condition with this non running Johnson 175 hp motor (J175TLCCM). Compression is 75 on 5 cylinders, but 35 on the middle starboard cylinder. I am seeking input if this is a good candidate fo repair or if I should seek a different motor? I have never rebuilt an outboard, but have built many high performance car engines. I have experience with smaller Johnson 9.5 and 35 hp motors as far as carb rebuilding and ignition troubleshooting. I'm told that normal compression for this motor should be 90-100 psi. If this is a good candidate to repair or rebuild what are my next steps to determine this. Also, the power tilt is not working when I direct connect 12 volts. It clicks, but does not move. Looks like a new tilt motor is about $130, but guessing there could be deeper problems in the hydraulics. I have an opportunity to purchase a mid 90's Yamaha Pro V 150 with all hardware for $2k. Need help determining best path forward.
The only information I have is that previous owner was going down the lake at 1/2 throttle and motor suddenly died and would not restart. He then traded it to the guy I got it from for a newer boat. Thanks in advance for any help.
The only information I have is that previous owner was going down the lake at 1/2 throttle and motor suddenly died and would not restart. He then traded it to the guy I got it from for a newer boat. Thanks in advance for any help.
Last edited: