Hello,
I have research this forum for few weeks and couldn't find something for my specific problem. So I will appreciate if someone can help me.
I have a 15.8Ft Glastron T-161 with a 1983 Johnson 70HP J70ELCTE.
Bout it about 2 moths ago.
My Problem is:
On WOT, Motor runs good by my self. and runs okay with me and wife. But whenever I put more people, like 4 people on boat, it slows down really bad. like between 5-10mph. I do not have a speedmeter so im guessing the speed.
it does kinda goes on plane position and Im guessing is because the hydrofoil (stingray xrIII) I put on it, but like I said it goes really slow, and rpm wont go over 2,500rpm, and use a hell more fuel too.
What I have done so far:
- New fuel line (from gas tank to fuel pump)
- New Rectifier
- Run lot of SeaFoam thru the gas tank.
- Clean 3 Carbs.
- Change sparks plugs
- Replace bottom cylinder spark plug wire that was broken.
- Clean Fuel filter attached to fuel pump.
- I have checked for leaks on fuel lines from pump to carbs.
- Upgraded 15pitch aluminum propeller to 17pitch stainless steel propeller.
- Add Hydrofoil
- Use only ethanol free gas for the last 2 months.
- Checked Compression:
- Top Cylinder Between 135-140Psi
- Middle Cylinder stable 130Psi
- Bottom Cylinder stable 125Psi
I don't know what else to do. I was thinking it might have to do with Timing and Synch?
One odd thing I notice is, when I removed the spark Plugs to do compression test, the bottom spark plug was super clean, compared to the top and middle plug..why?
And only the bottom cylinder will exhaust fuel thru the spark plug hole when I crank the engine to get top and bottom cylinders compression... is this normal? it was giving me 135 to 145psi with all that fuel being exhaust, after I unplug fuel tank and let it exhaust all that fuel, it when stable 125psi.
Also when I wire my tachometer to the bottom sparkplug wire, it will have a lower rpm. like 700-800rpm while the 2 other plug will have 1,500 rpm. is this normal??
The bottom sparkplug wire I replace, its not the OEM plug wire, because they didn't have it at the auto parts. so I used this:
http://www.oreillyauto.com/site/c/de...0063&ppt=C0150
Would this be a problem??
Another thing I notice, the carbs have 2 inlets, one for fuel and one that comes from that choke thing, automatic choke I believe.. well the bottom carb is missing the hose coming from choke. and it looks like it was done intentionally because from the choke hose there is only one splitter that goes to carb 1 and carb 2.... so is this normal?? and what is that hose for??
I cant get no mechanic to help me out because all boat shops in my area are "behind schedule for like 3-4weeks".
have anyone had this problem?
Like I was thinking it could be a timing & sync problem but wondering what is all you guys opinion.
And if any of you know a Timing and sync video for this specific outboard, please let me know.
Thanks
I have research this forum for few weeks and couldn't find something for my specific problem. So I will appreciate if someone can help me.
I have a 15.8Ft Glastron T-161 with a 1983 Johnson 70HP J70ELCTE.
Bout it about 2 moths ago.
My Problem is:
On WOT, Motor runs good by my self. and runs okay with me and wife. But whenever I put more people, like 4 people on boat, it slows down really bad. like between 5-10mph. I do not have a speedmeter so im guessing the speed.
it does kinda goes on plane position and Im guessing is because the hydrofoil (stingray xrIII) I put on it, but like I said it goes really slow, and rpm wont go over 2,500rpm, and use a hell more fuel too.
What I have done so far:
- New fuel line (from gas tank to fuel pump)
- New Rectifier
- Run lot of SeaFoam thru the gas tank.
- Clean 3 Carbs.
- Change sparks plugs
- Replace bottom cylinder spark plug wire that was broken.
- Clean Fuel filter attached to fuel pump.
- I have checked for leaks on fuel lines from pump to carbs.
- Upgraded 15pitch aluminum propeller to 17pitch stainless steel propeller.
- Add Hydrofoil
- Use only ethanol free gas for the last 2 months.
- Checked Compression:
- Top Cylinder Between 135-140Psi
- Middle Cylinder stable 130Psi
- Bottom Cylinder stable 125Psi
I don't know what else to do. I was thinking it might have to do with Timing and Synch?
One odd thing I notice is, when I removed the spark Plugs to do compression test, the bottom spark plug was super clean, compared to the top and middle plug..why?
And only the bottom cylinder will exhaust fuel thru the spark plug hole when I crank the engine to get top and bottom cylinders compression... is this normal? it was giving me 135 to 145psi with all that fuel being exhaust, after I unplug fuel tank and let it exhaust all that fuel, it when stable 125psi.
Also when I wire my tachometer to the bottom sparkplug wire, it will have a lower rpm. like 700-800rpm while the 2 other plug will have 1,500 rpm. is this normal??
The bottom sparkplug wire I replace, its not the OEM plug wire, because they didn't have it at the auto parts. so I used this:
http://www.oreillyauto.com/site/c/de...0063&ppt=C0150
Would this be a problem??
Another thing I notice, the carbs have 2 inlets, one for fuel and one that comes from that choke thing, automatic choke I believe.. well the bottom carb is missing the hose coming from choke. and it looks like it was done intentionally because from the choke hose there is only one splitter that goes to carb 1 and carb 2.... so is this normal?? and what is that hose for??
I cant get no mechanic to help me out because all boat shops in my area are "behind schedule for like 3-4weeks".
have anyone had this problem?
Like I was thinking it could be a timing & sync problem but wondering what is all you guys opinion.
And if any of you know a Timing and sync video for this specific outboard, please let me know.
Thanks
Last edited: