1983 Evinrude 115hp V4

[Vi mom]

Hi everyone! I need help to replace/solve the choke on a new control box. Not long ago the original control box fell apart and having bunch of issues, so got replaced by 96' and up control box and key switch with lanyard, but doesn't have choke. The control box is 5006180/5006181
The ignition key switch is 5005801
How can we solve it in the simplest way?
Thanks

 

[flyingscott]

Does the key not push in?

 

[Vi mom]

Not that kind of to push to choke key switch. The seller said to toggle the switch, but don't know how.

 

[flyingscott]

try pulling up on the key. It may only work if you turn the key to on.

 

[Vi mom]

try pulling up on the key. It may only work if you turn the key to on.

Ok. If that doesn't work, would work to connect a toggle switch onto the wire of the choke?

 

[Vi mom]

Ok. If that doesn't work, would work to connect a toggle switch onto the wire of the choke?

It's a 3 pin LED switch, on-off 12V

 

[racerone]

Post pictures of the stuff you have.----Factory control boxes use an ignition switch that you push in for the choke / primer function

 

[Vi mom]

Post pictures of the stuff you have.----Factory control boxes use an ignition switch that you push in for the choke / primer function

https://www.ebay.com/itm/183908326460 This is the key what I have

 

[Vi mom]

https://www.ebay.com/itm/183908326460 This is the key what I

https://www.ebay.com/itm/183908326460 This is the key what I have

The key push in to choke looks like this https://www.amazon.com/dp/B00CFR8A9...colid=AAO2N03KYABQ&psc=1&ref_=lv_ov_lig_dp_it

 

[Vi mom]

I don't know if counts the ending of the key switch if round or flat plate. On the old control box had everything on this how looked like https://www.marineengine.com/newparts/part_details.php?pnum=OMC0397184
But it fell apart, so had to be replaced to a newer, and rewired. https://www.ebay.com/itm/134070825602 This is the new control box

 

[racerone]

The 5005801 is to be pushed in for the choke / electric primer function.---You just need to hook it up the correct way I think.----Those older control boxes are very good and rarely break / fall apart

 

[Vi mom]

The 5005801 is to be pushed in for the choke / electric primer function.---You just need to hook it up the correct way I think.----Those older control boxes are very good and rarely break / fall apart

The handle fell apart and some inner plastic part. It's a headache to take it apart and replace them all the time.
Yeah,I'm not an electrician, but tried to go after the colors of the wires.
Thank you very much your time and knowledge to helping me out, very appreciate it.
I had to buy a new key set what I sent to you on eBay, because what came with the control had no key to it, and I hooked up the wires how it was on the switch in the control. I hope, I'm not screwed it up.

 

[flyingscott]

Did you buy an actual OMC box or chinese knockoff? Do you have the adaptor to go to the red plug? your # comes up as a much newer box

 

[Vi mom]

Did you buy an actual OMC box or chinese knockoff? Do you have the adaptor to go to the red plug? your # comes up as a much newer box

Probably it's a rebuilt one,no brand on it. It's OMC

 

[Vi mom]

Probably it's a rebuilt one,no brand on it. It's OMC

It's came from Georgia.

 

[flyingscott]

Put up a pic. It should push in for choke.

 

[Vi mom]

Put up a pic. It should push in for choke.

Thank you, all your time and knowledge. It was solved with a separate switch button. Working well.