chargereiger6907
Recruit
Thread starter- Joined
- Oct 16, 2017
- Messages
- 2
Hey guys, new to the forum here. I bought this 1982 50hp evinrude over the summer and have been having problems with it running in the water. Did a compression check on both cylinders and they are 130psi. Rebuilt both carbs, all new fuel system from the fuel pump to the gas tank, new coils and powerpack. With the motor running on ears it runs great but once the motor is in the water it will only run with the cover off and runs very sluggish. Is there some type of air-fuel adjustment screw on the carbs??? I'm lost at this point. Thanks