1978 4hp 2 stroke Johnson seahorse

Jonboatfisherman

Recruit
Thread starter
Joined
Mar 25, 2017
Messages
1
I've got a 1978 4 hp 2 stroke johnson seahorse I bought it off craigslist and everything was clean,. I've now taken the motor out on the lake 3 times. Today I got back and noticed a sticky black/Brown sludge in the engine compartment I can't tell if it's leaking from the carb or the head of the engine the motor runs great other than sometimes when I'm at full throttle the rpms drop just a little then it seems to clear up. (Thinking fuel or carb ) I'm new to marine engines and wonder if this fuel oil sludge is normal or if I have a bigger problem. I can post pictures tomorrow but just wondering if anyone can help. Thanks. Also I'm using synthetic marine 2 stroke oil at 50:1 mixture if that helps. Any pointers would be greatly appreciated. Thanks. Again can post pics tomorrow.
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
I suggest you clean it up and run it. If you see any leakage, track it down and take care of it.
 

Bonaventure

Petty Officer 2nd Class
Joined
Jul 3, 2016
Messages
167
These old 2
strokes usually are a bit dirty. If mixed gas gets spilled the oil does not evaporate. Unburned 2 stroke oil finds it's way onto the exterior surfaces. The nature of the motor's operation means that the crankcase has to be absolutely airtight from the reed valve gasket to the head gasket or the engine will not run.

If the motor runs well do not sorry about a little oil on the outside. It seeps out from who knows where. Just clean it off and use the engine.
 
Top